Robus

Warm air

50% less energy consumption compared to other dryers of similar performance

High speed, high efficiency

Streamlined air duct and nozzle design combine to produce a concentrated stream of high speed air to dry hands in under 10 seconds

PIR activated.

Spare retention clip for R101/R108 downlight

.

Housing for GU10 Recessed Fittings SC

Spare lamp holder for GU10 lamps

C/w terminal block and single clip bracket

Safety class 3

.

LED replacement for 2 x 58W fluorescent corrosion proof fitting
5,000K cool white light output
50,000 hour average lamp life Part L2 compliant options available via Conversions: 0-10V, dimmable and Microwave sensor
IP65, can be used for internal or external applications
Complete with stainless steel clips
Plastic clips available, RCPPCCLIPS
Universal input driver, suitable for 110V operation
LED Type Lamp Included
Energy Saving
Safety Class: 1
Photo Metrics Available
Conversion Suitable
Power Factor: >0.

LED replacement for 1 x 58W fluorescent corrosion proof fitting
5,000K cool white light output
50,000 hour average lamp life Part L2 compliant options available via Conversions: 0-10V, dimmable and Microwave sensor
IP65, can be used for internal or external applications
Complete with stainless steel clips
Plastic clips available, RCPPCCLIPS
Universal input driver, suitable for 110V operation
LED Type Lamp included
Energy Saving
Safety Class: 1
Photo Metrics Available
Conversion Suitable
Power Factor: >0.

 



Light output comparable to 10W halogen

Can be surface mounted or semi recessed – remove outer cowl for semi recessed option

Mains voltage - no need for driver

Complete with 1.

Energy Saving

Bathroom Zone: 2

Safety Class: 1

Photometrics Available

GR10q type lamp included

C/w 4 pin 3500k 28W lamp

12,000 hour average lamp life

Robust and vandal resistant polycarbonate opal or prismatic diffuser with ABS base

Maintained emergency fitting.

Push on/off operation

Bakelite resin front plates in white RAL9010 finish

Leading edge dimmer

.

Robus 200W OLYMPIC Flood light - Black.

Energy Saving

Bathroom Zone: 2

Safety Class: 1

Photometrics Available

GR10q type lamp included

C/w 4 pin 3500k 28W lamp

12,000 hour average lamp life

Robust and vandal resistant polycarbonate opal or prismatic diffuser with ABS base

Maintained emergency fitting.

Over 85% energy saving

Pack contains 1m track, live and dead ends and 3 x 240 lumen 4W GU10 LED lamps

Adjustable light heads

No IR or UV content

Alternatives:  Brushed Chrome

Comparable to: 35W Halogen

Type Lamp Included

Lumens per Wattage: 55

Energy Saving

Photometrics available

Lumens L100: 675lm

Lux at 1m : 380lux

CRI at L100: 70



 .

Robust and vandal resistant polycarbonate opal diffuser with ABS base

IP65, suitable for internal and external applications

Option of black or white base and opal or prismatic diffuser

C/w 4 pin 3500k 16W lamp

Integral high frequency ballast, flicker free start.

Weatherproof housing - injection moulded ABS

180° detection

Minimum load 25W

Adjustable time delay (10 secs - 4 mins)

Max 1200W tungsten or 300W fluorescent

Alternatives: Black

Safety class 2

Dimension: H: 75mm x W: 85mm x D: 95mm

.

 Suitable for use in decking areas, drives, pathways, sign illumination, wall washing, atriums, patios, car parks, garages, industrial units
 LED replacement for 35W Metal Halide/ 150W Halogen flood lights
 Polycarbonate trim with tempered glass providing high impact rating of IK07
 Easy installation through 20mm PG gland and large connector block
 Pre-drilled, angled mounting bracket for fast & simple installation
 No warm up or cool down period required by LED
 High efficacy of 79lm/W
 Wide operating ambient temperature range of -20øC to 40øC
 Suitable for switching by PIR, Microwave or Photocell
.

 Suitable for use in sheltered outdoor common areas, gardens, hotel, pub and restaurant walkways
 LED replacement for 100W Incandescent wall/ceiling fittings
 Polycarbonate construction with high impact resistance of IK08
 UV stabilized
 Large connector block with two cable entry/exit points for ease of loop-in/loop-out
 High efficacy of 79lm/W
 Wide ambient operating temperature range of -20øC to +40øC
 Complete with white and black trims
 Suitable for switching by PIR, Microwave or Photocell
.

 Suitable for use in decking areas, drives, pathways, sign illumination, wall washing, atriums, patios, car parks, garages, industrial units
 LED replacement for 20-80W Metal Halide/ 75-350W Halogen flood lights
 Polycarbonate trim with tempered glass providing high impact rating of IK07
 Easy installation through 20mm PG gland and large connector block
 Pre-drilled, angled mounting bracket for fast and simple installation
 No warm up or cool down period required by LED
 High efficacy of 90lm/W
 Wide operating ambient temperature range of -20øC to 40øC
 10W, 20W, 30W available with PIR sensor with adjustable time 10sec to 10min, detection range of 7-10m, and light level of 10lx to 2000lx
.

 Suitable for use in flat and apartment blocks, public buildings, care homes, communal areas, reception areas
 LED replacement for 2x18W T8 fluorescent surface fittings
 Low profile aluminium housing with PBT end caps and polycarbonate diffuser
 High impact rating of IK08
 Complete with stainless steel mounting brackets
 Prewired with 1m of flex
 High efficacy of 97lm/W
 Wide operating ambient temperature range of -20øC to +40øC
 Suitable for switching by PIR, Microwave or Photocell
.

 Suitable for use in sheltered outdoor common areas, gardens, hotel, pub and restaurant walkways
 LED replacement for 60W Incandescent wall/ceiling fittings
 Polycarbonate construction with high impact resistance of IK08
 UV stabilized
 Large connector block with two cable entry/exit points for ease of loop-in/loop-out
 High efficacy of 75lm/W
 Wide ambient operating temperature range of -20øC to +40øC
 Complete with white and black trims
 Suitable for switching by PIR, Microwave or Photocell
.

 Suitable for use in toilets, rest rooms, bathrooms or cloak rooms in domestic, commercial, entertainment or retail premises
 LED replacement for 28W 2D fluorescent fittings
 Pressed steel base with twist and lock type PMMA diffuser
 CCT selectable via integrated switch between 3000K, 4000K and 6000K
 High efficacy of 75-96lm/W
 Wide ambient operating temperature range of -20øC to +40øC
 Suitable for use 24/7
 Suitable for switching by PIR, Microwave or Photocell
.

 Suitable for use in retail shops, public buildings, communal areas, sports centres, stairwells, corridors, walkways
 LED replacement for 38W 2D fluorescent fittings
 Complete switch allowing to select 3000K, 4000K or 6500K colour temperature
 High impact resistant polycarbonate housing
 Impact Rating of IK09
 High efficiency Pro-diffuser allows maximum light transmission, provides low glare, creates even light distribution
 High efficacy of 70-83lm/W
 Wide operating ambient temperature range of -10øC to +35øC
 180lm output in emergency mode
 20% of the maintained output
 Suitable for switching by PIR, Microwave or Photocell
 Suitable for 24/7 use
.

 Suitable for use in retail shops, public buildings, communal areas, sports centres, stairwells, corridors, walkways
 LED replacement for 28W 2D fluorescent fittings
 Complete switch allowing to select 3000K, 4000K or 6500K colour temperature
 High impact resistant polycarbonate housing
 Impact Rating of IK09
 High efficiency Pro-diffuser allows maximum light transmission, provides low glare, creates even light distribution
 High efficacy of 61-73lm/W
 Chrome trim available (R282TRIM-03)
 Wide operating ambient temperature range of -10øC to +35øC
 Provides 3 hour emergency discharge duration
 180lm output in emergency mode
 20% of the maintained output
 Suitable for switching by PIR, Microwave or Photocell
 Suitable for 24/7 use
.

 Suitable for use in retail shops, public buildings, communal areas, sports centres, stairwells, corridors, walkways
 LED replacement for 28W 2D fluorescent fittings
 Complete switch allowing to select 3000K, 4000K or 6500K colour temperature
 High impact resistant polycarbonate housing
 Impact Rating of IK09
 High efficiency Pro-diffuser allows maximum light transmission, provides low glare, creates even light distribution
 High efficacy of 76-92lm/W
 Chrome trim available ( R282TRIM-03)
 Wide operating ambient temperature range of -20øC to +35øC
 Suitable for switching by PIR, Microwave or Photocell
 Suitable for 24/7 use
.

2 Years Guarantee

Cut-Out Dia 73mm / Depth 135mm / Diameter 91mm

Intumescent seals to give 30, 60 and 90 mins protection

Compatible with dichroic and aluminium lamp types

Complies with BS476 Part 20, 21 &23 

Lamp Not Included




 

 

 

 .

Die cast aluminium straight or directional downlight

C/w bracket, terminal block & double insulated GZ10 lamp holder

Twist & lock front bezel

Easy lamp replacement

Colour: White

Lamp not Included

Safety Class: 2

Adjustment Angle: 20

Dimension: Dia: 93mm x D: 100mm

.

Die cast aluminium straight or directional downlight

C/w bracket, terminal block & double insulated GZ10 lamp holder

Twist & lock front bezel

Easy lamp replacement

Colour: Brushed Chrome

Lamp not Included

Safety Class: 2

Dimension: Dia: 78mm x D: 100mm

.

Colour: Brushed Chrome

Lamp not Included

Cap Type: GU/GZ10

Bathroom Zone: 2

Dimension: Dia: 83mm x D: 105mm

Die cast aluminium construction

GZ10 lamp holder for 230/240V 50W halogen lamps

Sealed to protect ceiling from moisture ingress

Following lamps can be used with this fitting: LGU1035, LGU1050 RGU1050, RGU48LED-WW

.

Energy savings in excess of 50%

Lasts up to 10 times longer than standard compact fluorescent PL

SMD LED’s with low lumen depreciation – at least 70% of initial light output at 50,000 hours

Compliant with Building Regulations Part L2, with efficacy values of 80 luminaire lumens per circuit watt

Suitable for PIR switching

Pre-wired driver to fitting male/female connector

Options available through Conversions: Emergency, 0-10V and DALI Dimmable

Comparable to: 2 x 18W PL

Power Factor: ›0.

 Suitable for use in offices, health cares and hospitals, shops, hotels, restaurants, schools and universities
 LED replacement for 2x18W CFL downlights
 Low profile downlights ideal for installations in shallow ceiling voids
 Die cast aluminium construction
 High impact rating of IK10
 Matt white finish
 Stainless steel screws and spring clips
 Complete with plug and play driver and 1m flex
 High efficacy of 76lm/W
 Operating ambient temperature of -20øC to +40øC
 Suitable for switching by PIR, Microwave or Photocell
 Emergency, analogue dimmable and DALI dimmable available through Conversions
.

 Suitable for use in offices, health cares and hospitals, shops, hotels, restaurants, schools and universities
 LED replacement for 13W CFL downlights
 Low profile downlights ideal for installations in shallow ceiling voids
 Die cast aluminium construction
 High impact rating of IK10
 Matt white finish
 Stainless steel screws and spring clips
 Complete with plug and play driver and 1m flex
 High efficacy of 68lm/W
 Operating ambient temperature of -20øC to +40øC
 Suitable for switching by PIR, Microwave or Photocell
 Emergency, analogue dimmable and DALI dimmable available through Conversions
.

Recessed shower downlight with pressed steel body and die cast aluminium front bezel with intumescent seals to give 90 minutes fire protection in an appropriate 90min rated ceiling.

Robus Mains Voltage Fire Rated Adjustable Downlight.